Sanyo VCC-XZ400P Instruction Manual page 5

8 Drop-prevention chain
Keep this attached at all times to prevent the
camera cover from falling down during
installation.
9 Camera fixing screws (See p43)
You can use the hexagonal wrench (small,
accessory) to loosen these screws and then
remove the camera.
F Video output connector (BNC type)
(See p7, 9)
Connection this connector to a device such
as a digital video recorder (or time lapse
VCR) or monitor with a VIDEO IN connector.
G Connection cord (See p7 – 10)
Connect to other devices in accordance with
the information on the color display label.
The power cord and the RS-485 have a
one-touch connector (accessory) attached.
H Connection cord hole (See p5)
If routing the connection cord outside the
wall, install the camera so that this hole is
facing downward and pull the connection
cord out from it.
4