Table of Contents
Advertisement
MOUNTING THE LENS
L
Fig. 1
Check the lens mount
Do not use a lens if the length "
proper installation.
Installation of a DC type auto-iris lens (sold separately)
A 1/3 inch CS mount type lens without EE amplifier circuit that only uses a DC power source. This camera can
receive (the A.I. LENS switch to the DC type) a CS mount type lens without the need of an adaptor.
If the lens plug shape or wiring does not correspond, please install the supplied plug as indicated in the pin
layout table.
CAUTION:
When using an auto-iris lens, the supplied clamping core must be installed on the lens wire (see Fig. 1), in
order to prevent electromagnetic interference to the other devices connected.
L
5
" is more than
mm. That may damage the camera and prevent
6
English
Advertisement
Table of Contents
