Sanyo VCC-XZ400P Instruction Manual page 13

Operations of Setting screen
Refer to the pages given in the table below for each function for details on setting the functions.
MAIN MENU
(Function)
LANGUAGE
(See p13)
CAMERA ID
(See p13)
SYNC (See p14)
PRIVACY MASK
(See p15)
LENS (See p17)
MIRROR (See p25)
VIEW SETTING
(See p26)
OPTION (See p38)
PRESET
Simple camera address confirmation
When connecting the power cord to an outlet, the camera address (See p39) is displayed on the
monitor for 5 – 15 seconds.
CAMERA ADDRESS
000
This lets you change the setting screen language to French or German.
If using more than one camera, this lets you assign different IDs to each
camera, and the IDs appear on the monitor.
The sync method can be changed to Line-Lock (synchronizes the unit
with the power frequency).
The default setting is internal synchronization.
This covers an area of the screen with a gray pattern for areas that may
infringe on privacy. Gray patterns can be placed on up to 4 areas.
This lets you make settings such as automatic and manual focus settings,
zoom speed and zoom ratio. In addition, it can also be used for automatic
switching to color images during daytime, or to black and white images at
times of low luminance such as nighttime.
This lets you invert the images horizontally, vertically or horizontally and
vertically.
Different detailed settings can be made for each camera (9 screens).
After they are set, these are linked to "VIEW SETTING (0 – 8)" settings
for preset positions.
For setting communications conditions and alarms.
This returns all settings to their defaults.
The PRIVACY MASK menu and the CONTROL/ADDRESS settings in
the OPTION menu will not be returned to their defaults.
12
Operation