Address Setting; Alarm Setting - Sanyo VCC-XZ400P Instruction Manual

OPTION SETTING

ADDRESS setting

Use this to set the address for this camera when
more than one camera is connected or when
other peripheral devices or a system controller
have been connected.
1
In the MAIN MENU, use the CURSOR
button (j or l) to move the cursor to
SET for OPTION, then press the SET
button.
The OPTION screen will appear.
2
Use the CURSOR button (j or l) to
move the cursor to ADDRESS, and then
use the CURSOR button (d or c) to
select the address.
Available settings: 0 – 127
The ADDRESS setting will not be returned to
its default setting even if PRESET is set to
ON in the MAIN MENU.
To close the menu screen or return to the
previous screen, select BACK or END for
MENU and press the SET button.

ALARM setting

This is used for settings related to alarm input
(with zoom up function) and alarm output with.
This is used for settings related to alarm input
and alarm output. In addition, it is also used to
force selection of COLOR mode or B/W mode
when the DAY/NIGHT setting function is being
used.
1
In the MAIN MENU, use the CURSOR
button (j or l) to move the cursor to
SET for OPTION, then press the SET
button.
The OPTION screen will appear.
2
Use the CURSOR button (j or l) to
move the cursor to SET for ALARM, then
press the SET button.
The ALARM SETTING screen will appear.
Alarm input setting (ALARM IN)
A
Connect the ALARM IN cord to the external
alarm signal.
ALM:
The control terminal (ALARM IN) is used for
alarm input.
ZOOM:
This sets the zoom ratio when an alarm is input.
COLOR:
The ALARM IN cord is used for Color or
Black/White selection input. External operations
can then be used to forcibly switch the mode to
color mode or black & white mode.
If this setting is selected, the alarm function will
not operate.
39