Reinstall Control Panel; Reinstall Burner Control Knobs & Igniter Wires - Weber Vieluxe 27 Built-In Grill Owner's Manual

GENERAL MAINTENANCE

Reinstall control panel

Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of the front of the cooking box.
Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws.
Vieluxe ® 27" Built-In
Reinstall burner control knobs & igniter wires
You will need: 6 control knobs.
Place corresponding control knobs down through the
bezels onto the valve stems. From underside of control
panel, replace the two wires of the igniter.
Vieluxe ® 27" Built-In
26
Vieluxe ® 39" Built-In
Parts required: 8 control knobs.
Place corresponding control knobs down through the
bezels onto the valve stems. From underside of control
panel, replace the two wires of the igniter.
Vieluxe 39" Built-In
®