Replacing Main Burners - Weber Vieluxe 27 Built-In Grill Owner's Manual

GENERAL MAINTENANCE

Replacing main burners

1. Your Vieluxe ® gas grill must be OFF and cool.
2. Turn OFF gas at source.
3. Disconnect regulator.
4. Remove cooking grates.
4. Remove Flavorizer ® bars.
5. To remove control panel refer to "Remove the control panel" under Check for Gas Leaks on
6. Remove the manifold: Remove bolts from manifold brackets. Pull manifold out from burner tubes leaving flexible
connections on right side in place.
Vieluxe ® 27" Built-In
7. Slide the burner assembly from each Burner Set.
The left and right burners are connected by the
Crossover ® tube.
8. Lift and twist the burner assembly slightly to
separate the Crossover
Remove the burner tubes from cooking box.
® tube (1) from the burners.
Vieluxe ® 39" Built-In
page 24.
29