Reinstall Control Panel; Reinstall Burner Control Knobs & Igniter - Weber Vieluxe Slide-In Dual Burner Station Owner's Manual

GENERAL MAINTENANCE

Reinstall control panel

Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of the front of the burner station.
Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws.
Slide-In Burner Station
Control Panel
Bracket
Control Panel
Screws
Reinstall burner control knobs & igniter wires
You will need: 2 control knobs, Igniter button and
igniter nut.
Place control knobs(1) in through the bezels onto the
valve stems. Push the igniter(4) through the control
panel so that the threads appear, replace the igniter
nut(3) and the igniter button(2).
Slide-In Burner Station
(1)
(2)
(3) (4)
(1)
Countertop Burner Station
Control Panel
Bracket
Control Panel
Screws
You will need: 2 control knobs, Igniter button and
igniter nut.
Place control knobs(1) in through the bezels onto the
valve stems. Push the igniter(4) through the control
panel so that the threads appear, replace the igniter
nut(3) and the igniter button(2).
Countertop Burner Station
(1)
(2)
(3) (4)
(1)
15