Reinstall Control Panel; Reinstall Burner Control Knobs & Igniter Wires - Weber Vieluxe 44 Inch Owner's Manual

GENERAL MAINTENANCE

Reinstall control panel

Parts required: control panel, screws, and burner control knobs.
Place the control panel back onto the control panel brackets on either side of the front of the cooking box.
Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws.
Vieluxe
Reinstall burner control knobs & igniter wires
You will need: 4 large control knobs, 4 small
control knobs.
Place corresponding control knobs down through the
bezels onto the valve stems. From the underside of the
control panel, replace the two wires of each igniter.
Vieluxe ® 44 Inch
38
® 44 Inch
Vieluxe ® 56 Inch
Parts required: 6 large control knobs, 4 small
control knobs.
Place corresponding control knobs down through the
bezels onto the valve stems. From the underside of the
control panel, replace the two wires of each igniter.
Vieluxe ® 56 Inch