SECTION 10—RECLINER
Storing/Replacing Spreader Bar
Storing Spreader Bar
NOTE:!For!this!procedure,!refer!to!
FIGURE 10.5.
NOTE:!The!9000XT!Recliner!is!folded!for!
either!storage!or!transporting.!One!side!of!the!
spreader!bar!MUST!be!removed!and!placed!in!a!
vertical!position!alongside!the!recliner!tube.
Removing From Stored Position
1. Rotate!the!end!of!the!spreader!bar!90
toward!the!opposite!side!frame.
2. Install!threaded!end!of!locking!knob!
into!locknut!located!on!the!opposite!
side!frame.!Securely!tighten!both!
knobs.
Placing In Stored Position
1. Remove!one!locking!knob!from!the!spreader!bar.
2. Loosen!the!remaining!locking!knob!on!the!spreader!bar.
3. Rotate!detached!end!of!the!spreader!bar!90°!down!toward!floor.
Replacing Spreader Bar
NOTE:!For!this!procedure,!refer!to!
FIGURE 10.6.
1. Remove!both!locking!knobs!that!secure!
the!spreader!bar!to!the!side!frames.
2. Remove!existing!spreader!bar.
3. Secure!new!spreader!bar!to!the!side!
frames!with!the!existing!locking!knobs.!
Securely!tighten.
9000 Series
Locking
Knob
Spreader
Bar
Recliner
Tube
o!
FIGURE 10.5 Storing/Replacing Spreader
Locking Knobs
Side Frame
FIGURE 10.6 Replacing Spreader Bar
60
Side Frame
Threaded
Locking
End
Knob
Bar
Spreader Bar
Side Frame
Part No. 1056953