Dot1X Retry - HP 6125G Command Reference Manual

View
Ethernet interface view
Default level
2: System level
Parameters
None
Description
Use dot1x re-authenticate to enable the periodic online user re-authentication function.
Use undo dot1x re-authenticate to disable the function.
By default, the periodic online user re-authentication function is disabled.
Periodic re-authentication enables the access device to periodically authenticate online 802.1X users on
a port. This function tracks the connection status of online users and updates the authorization attributes
assigned by the server, such as the ACL, VLAN, and user profile-based QoS.
You can use the dot1x timer reauth-period command to configure the interval for re-authentication.
Related commands: dot1x timer reauth-period.
Examples
# Enable the 802.1X periodic online user re-authentication function on GigabitEthernet 1/0/1 and set
the periodic re-authentication interval to 1800 seconds.
<Sysname> system-view
[Sysname] dot1x timer reauth-period 1800
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dot1x re-authenticate

dot1x retry

Syntax
dot1x retry max-retry-value
undo dot1x retry
View
System view
Default level
2: System level
Parameters
max-retry-value: Specifies the maximum number of attempts for sending an authentication request to a
client, in the range of 1 to 10.
Description
Use dot1x retry to set the maximum number of attempts for sending an authentication request to a client.
Use undo dot1x retry to restore the default.
By default, the maximum number of attempts that the device can send an authentication request to a
client is twice.
108