Related commands: reset stop-accounting-buffer and display stop-accounting-buffer.
Examples
# In HWTACACS scheme hwt1, enable the switch to buffer the stop-accounting requests getting no
responses.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] stop-accounting-buffer enable
timer quiet (HWTACACS scheme view)
Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Default level
2: System level
Parameters
minutes: Primary server quiet period. The value ranges from 1 to 255, in minutes.
Description
Use timer quiet to set the quiet timer for the primary server. When the primary server is found
unreachable, the switch changes the status of the server from active to blocked and keeps the server in
blocked state until this timer expires.
Use undo timer quiet to restore the default.
By default, the primary server quiet period is 5 minutes.
Related commands: display hwtacacs.
Examples
# Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10
timer realtime-accounting (HWTACACS scheme view)
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
HWTACACS scheme view
Default level
2: System level
86