Sftp Client Ipv6 Dscp; Sftp Client Ipv6 Source - HP 6125G Command Reference Manual

Description
Use sftp client dscp to set the DSCP value for IPv4 packets sent by the SFTP client.
Use undo sftp client dscp to restore the default.
By default, the DSCP value in IPv4 packets sent by the SFTP client is 16.
Examples
# Set the DSCP value to 30 for IPv4 packets sent by the SFTP client.
<Sysname> system-view
[Sysname] sftp client dscp 30

sftp client ipv6 dscp

Syntax
sftp client ipv6 dscp dscp-value
undo sftp client ipv6 dscp
View
System view
Default level
2: System level
Parameters
dscp-value: Specifies the DSCP value in the IPv6 packets sent by the SFTP client, which ranges from 0 to
63.
Description
Use sftp client ipv6 dscp to set the DSCP value for IPv6 packets sent by the SFTP client.
Use undo sftp client ipv6 dscp to restore the default.
By default, the DSCP value in IPv6 packets sent by the SFTP client is 8.
Examples
# Set the DSCP value to 30 for IPv6 packets sent by the SFTP client.
<Sysname> system-view
[Sysname] sftp client ipv6 dscp 30

sftp client ipv6 source

Syntax
sftp client ipv6 source { ipv6 ipv6-address | interface interface-type interface-number }
undo sftp client ipv6 source
View
System view
Default level
3: Manage level
227