Dot1X - HP 6125G Command Reference Manual

Field
Auth-fail VLAN
Critical VLAN
Critical recovery-action
Max number of on-line users
EAPOL Packet
Sent EAP Request/Identity Packets
EAP Request/Challenge Packets
EAP Success Packets
Fail Packets
Received EAPOL Start Packets
EAPOL LogOff Packets
EAP Response/Identity Packets
EAP Response/Challenge Packets
Error Packets
Authenticated user
Controlled User(s) amount

dot1x

Syntax
In system view:
dot1x [ interface interface-list ]
undo dot1x [ interface interface-list ]
In Ethernet interface view:
dot1x
undo dot1x
View
System view, Ethernet interface view
Default level
2: System level
Description
Auth-Fail VLAN configured on the port. NOT configured is
displayed if no Auth-Fail VLAN is configured.
802.1X critical VLAN configured on the port. NOT configured
is displayed if no 802.1X critical VLAN is configured on the
port.
Action that the port takes when an active (reachable)
authentication server is detected available for the 802.1X
users in the critical VLAN:
•
reinitialize—The port triggers authentication.
•
NOT configured—The port does not trigger authentication.
Maximum number of concurrent 802.1X users on the port
Number of sent (Tx) and received (Rx) EAPOL packets
Number of sent EAP-Request/Identity packets
Number of sent EAP-Request/Challenge packets
Number of sent EAP Success packets
Number of sent EAP-Failure packets
Number of received EAPOL-Start packets
Number of received EAPOL-LogOff packets
Number of received EAP-Response/Identity packets
Number of received EAP-Response/Challenge packets
Number of received error packets
User that has passed 802.1X authentication
Number of authenticated users on the port
93