State (Local User View) - HP 6125G Command Reference Manual

terminal: Authorizes the user to use the terminal service, allowing the user to log in through the console
port.
web: Authorizes the user to use the Web service.
Description
Use service-type to specify the service types that a user can use.
Use undo service-type to delete service types configured for a user.
By default, a user is authorized with no service.
You can execute the service-type command repeatedly to specify multiple service types for a user.
Examples
# Authorize user user1 to use the Telnet service.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] service-type telnet

state (local user view)

Syntax
state { active | block }
undo state
View
Local user view
Default level
2: System level
Parameters
active: Places the local user in active state to allow the local user to request network services.
block: Places the local user in blocked state to prevent the local user from requesting network services.
Description
Use state to set the status of a local user.
Use undo state to restore the default.
By default, a local user is in active state.
By blocking a user, you disable the user from requesting network services. No other users are affected.
Related commands: local-user.
Examples
# Place local user user1 to the blocked state.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] state block
34