Authentication Super - HP 6125G Command Reference Manual

Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
local: Performs local authentication.
none: Does not perform any authentication.
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Description
Use authentication login to configure the authentication method for login users through the console port,
Telnet, or FTP.
Use undo authentication login to restore the default.
By default, the default authentication method for the ISP domain is used for login users.
The specified RADIUS or HWTACACS scheme must have been configured.
Related commands: local-user, authentication default, hwtacacs scheme, and radius scheme.
Examples
# Configure ISP domain test to use local authentication for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login local
# Configure ISP domain test to use RADIUS authentication scheme rd for login users and use local
authentication as the backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login radius-scheme rd local

authentication super

Syntax
authentication
radius-scheme-name }
undo authentication super
View
ISP domain view
Default level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a
case-insensitive string of 1 to 32 characters.
super { hwtacacs-scheme hwtacacs-scheme-name
8
| radius-scheme