Parameters
dscp-value: Specifies the DSCP value in the IPv4 packets sent by the SSH server, which ranges from 0 to
63.
Description
Use ssh server dscp to set the DSCP value for IPv4 packets sent by the SSH server.
Use undo ssh server dscp to restore the default.
By default, the DSCP value in IPv4 packets sent by the SSH server is 16.
Examples
# Set the DSCP value to 30 for IPv4 packets sent by the SSH server.
<Sysname> system-view
[Sysname] ssh server dscp 30
ssh server enable
Syntax
ssh server enable
undo ssh server enable
View
System view
Default level
3: Manage level
Parameters
None
Description
Use ssh server enable to enable the SSH server function so that the SSH clients can communicate with the
server through SSH.
Use undo ssh server enable to disable the SSH server function.
By default, SSH server is disabled.
Related commands: display ssh server.
Examples
# Enable SSH server.
<Sysname> system-view
[Sysname] ssh server enable
ssh server ipv6 dscp
Syntax
ssh server ipv6 dscp dscp-value
undo ssh server ipv6 dscp
203