Mac-Authentication Domain - HP 6125G Command Reference Manual

Use mac-authentication interface interface-list in system view to enable MAC authentication on a list of
ports, or mac-authentication in interface view to enable MAC authentication on a port.
Use undo mac-authentication in system view to disable MAC authentication globally.
Use undo mac-authentication interface interface-list in system view to disable MAC authentication on a
list of ports, or undo mac-authentication in interface view to disable MAC authentication on a port.
By default, MAC authentication is not enabled globally or on any port.
To use MAC authentication on a port, you must enable the function both globally and on the port.
Examples
# Enable MAC authentication globally.
<Sysname> system-view
[Sysname] mac-authentication
Mac-auth is enabled globally.
# Enable MAC authentication on port GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] mac-authentication interface GigabitEthernet 1/0/1
Mac-auth is enabled on port GigabitEthernet1/0/1.
Or
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mac-authentication
Mac-auth is enabled on port GigabitEthernet1/0/1.

mac-authentication domain

Syntax
mac-authentication domain domain-name
undo mac-authentication domain
View
System view, Ethernet interface view
Default level
2: System level
Parameters
domain-name: Specifies an authentication domain name, a case-insensitive string of 1 to 24 characters.
The domain name cannot contain any forward slash (/), colon (:), asterisk (*), question mark (?),
less-than sign (<), greater-than sign (>), or at sign (@).
Description
Use mac-authentication domain to specify a global authentication domain in system view or a port
specific authentication domain in interface view for MAC authentication users.
Use undo mac-authentication domain to restore the default.
By default, the default authentication domain is used for MAC authentication users. For more information
about the default authentication domain, see the domain default enable command in
configuration commands."
118
"AAA