HP 6125G Command Reference Manual page 281

View
Any view
Default level
1: Monitor level
Parameters
vlan-id: Specifies a VLAN by its number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display mac-forced-forwarding vlan to display the MFF configuration information of a specified
VLAN.
Related commands: mac-forced-forwarding and mac-forced-forwarding server.
Examples
# Display the MFF configuration information of VLAN 1.
<Sysname> display mac-forced-forwarding vlan 1
VLAN 1
Mode: Auto/Single
Gateway:
--------------------------------------------------------------------------
192.168.1.42
Server:
--------------------------------------------------------------------------
192.168.1.48
Table 37 Command output
Field
VLAN 1
Mode
Gateway
Server
(000f-e200-8046)
192.168.1.49
Description
ID of the VLAN to which the gateways belong.
MFF operating mode, which can be automatic (Auto), manual
(Manual), and single-gateway (Single).
IP and MAC addresses of gateways. If no information is learned,
N/A is displayed.
Server IP addresses.
272