Pki Certificate Access-Control-Policy; Pki Certificate Attribute-Group - HP 6125G Command Reference Manual

Description
Use organization-unit to specify the name of the organization unit to which this entity belongs.
Use undo organization-unit to remove the configuration.
By default, no organization unit name is specified for an entity.
Examples
# Configure the name of the organization unit to which an entity belongs as group1.
<Sysname> system-view
[Sysname] pki entity 1
[Sysname-pki-entity-1] organization-unit group1

pki certificate access-control-policy

Syntax
pki certificate access-control-policy policy-name
undo pki certificate access-control-policy { policy-name | all }
View
System view
Default level
2: System level
Parameters
policy-name: Name of the certificate attribute-based access control policy, a case-insensitive string of 1
to 16 characters. It cannot be a, al, or all.
all: Specifies all certificate attribute-based access control policies.
Description
Use pki certificate access-control-policy to create a certificate attribute-based access control policy and
enter its view.
Use undo pki certificate access-control-policy to remove certificate attribute-based access control
policies.
No access control policy exists by default.
Examples
# Configure an access control policy named mypolicy and enter its view.
<Sysname> system-view
[Sysname] pki certificate access-control-policy mypolicy
[Sysname-pki-cert-acp-mypolicy]

pki certificate attribute-group

Syntax
pki certificate attribute-group group-name
undo pki certificate attribute-group { group-name | all }
189