Certificate Request Url - HP 6125G Command Reference Manual

Parameters
count count: Specifies the maximum number of attempts to poll the status of the certificate request, in the
range of 1 to 100.
interval minutes: Specifies the polling interval in minutes, in the range of 5 to 168.
Description
Use certificate request polling to specify the certificate request polling interval and attempt limit.
Use undo certificate request polling to restore the defaults.
By default, the polling is executed every 20 minutes for up to 50 times.
After an applicant makes a certificate request, the CA might need a long period of time if it verifies the
certificate request manually. During this period, the applicant needs to query the status of the request
periodically to get the certificate as soon as possible after the certificate is signed.
Related commands: display pki certificate.
Examples
# Specify the polling interval as 15 minutes and the maximum number of attempts as 40.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] certificate request polling interval 15
[Sysname-pki-domain-1] certificate request polling count 40

certificate request url

Syntax
certificate request url url-string
undo certificate request url
View
PKI domain view
Default level
2: System level
Parameters
url-string: URL for certificate request, a case-insensitive string of 1 to 127 characters. It comprises the
location of the server and the location of CGI command interface script in the format
http://server_location/ca_script_location, where server_location must be an IP address and does not
support domain name resolution.
Description
Use certificate request url to specify the URL for certificate request through SCEP.
Use undo certificate request url to remove the configuration.
By default, no certificate request URL is specified for a PKI domain.
Examples
# Specify the certificate request URL.
<Sysname> system-view
[Sysname] pki domain 1
177