Related commands: display ssh server.
Examples
# Set the SSH user authentication timeout period to 10 seconds.
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
ssh server compatible-ssh1x
Syntax
ssh server compatible-ssh1x [ enable ]
undo ssh server compatible-ssh1x
View
System view
Default level
3: Manage level
Parameters
enable: Enables the SSH server to support SSH1 clients. This keyword is not necessary. Even if it is not
specified, the command can also enable the SSH server to support SSH1 clients.
Description
Use ssh server compatible-ssh1x to enable the SSH server to support SSH1 clients.
Use undo ssh server compatible-ssh1x to disable the SSH server from supporting SSH1 clients.
By default, the SSH server supports SSH1 clients.
The configuration takes effect only for clients that log in after the configuration
Related commands: display ssh server.
Examples
# Enable the SSH server to support SSH1 clients.
<Sysname> system-view
[Sysname] ssh server compatible-ssh1x enable
ssh server dscp
Syntax
ssh server dscp dscp-value
undo ssh server dscp
View
System view
Default level
2: System level
202