Netscreen Publications - Juniper NetScreen-5GT Wireless User Manual

When a CLI command appears within the context of a sentence, it is in bold (except for
variables, which are always in italic). For example: "Use the get system command to
display the serial number of a NetScreen device."
Note: When typing a keyword, you only have to type enough letters to identify the word
uniquely. For example, typing set adm u joe j12fmt54 is enough to enter the command
set admin user joe j12fmt54. Although you can use this shortcut when entering
commands, all the commands documented here are presented in their entirety.
N S P
ET CREEN
To obtain technical documentation for any Juniper Networks NetScreen product, visit
www.juniper.net/techpubs/.
For technical support, open a support case using the Case Manager link at
www.juniper.net/support/
9500 (outside the United States).
If you find any errors or omissions in the following content, please contact us at the e-mail
address below:
NetScreen-5GT Wireless
UBLICATIONS
or call 1-888-314-JTAC (within the United States) or 1-408-745-
techpubs-comments@juniper.net

NetScreen Publications

http://
5