Table of Contents
Advertisement
Here are descriptions of each setup item:
Fragment
Threshold (1):
RTS Threshold (2): Set the RTS threshold of wireless radio. Do not modify
Beacon Interval (3): Set the beacon interval of wireless radio. Do not modify
DTIM Period (4):
Data Rate (5):
N Data Rate (6):
Channel Width (7): Set channel width of wireless radio. You can modify
Preamble Type (8): Set the type of preamble, do not modify default value if
Broadcast ESSID (9): Decide if the wireless router will broadcast its own
Set the Fragment threshold of wireless radio.
Do not modify default value if you do not know correct
value (default value is 2346).
default value if you do not know correct value (default
value is 2347).
default value if you do not know correct value (default
value is 100).
Set the DTIM period of wireless radio. Do not modify
default value if you do not know correct value (default
value is 3).
Set the wireless data transfer rate to a certain value.
Since most wireless devices will negotiate with each
other and pick a proper data transfer rate automatically,
it is not necessary to change this value unless you know
what will happen after modification.
Same as above, but only for 802.11n & 802.11ac clients.
default value if you know what channel width you need
(default setting is '20 MHz').
you do not know correct value (default setting is 'Short
Preamble').
ESSID or not. You can hide the ESSID of your wireless
router (set the option to 'Disable') so only people who
know the ESSID of your wireless router can connect to it.
86
Advertisement
Table of Contents
