Table of Contents
Advertisement
5.3 Remote Management
This router does not allow management access from the Internet to prevent
possible security risks (especially when you have defined a weak password or
did not the change default password). However, you can still manage this
router from a specific IP address by enabling the 'Remote Management'
Function.
To do so, please follow these instructions:
Please click 'System' on the left of the web management interface menu, then
click 'Remote Management', and the following screen will be displayed on
your web browser:
Here are descriptions of each setup item:
Host Address (1):
Port (2):
Enable (3):
When you finish with all settings, click 'Apply' (4), and you will see the
1
Input the IP address of the remote host you wish to use to
initiate management access.
You can define the port number this router should expect
an incoming request from. If you're providing a web
service (default port number is 80), you should try to use
another port number. You can use the default port setting
'8080' or something like '32245' or '1429'. (Any integer
between 1 and 65534)
Select the field to start the configuration.
46
2
3
4
Advertisement
Table of Contents
