Table of Contents
Advertisement
5GHz Station (Infrastructure) Settings
Here are descriptions of each setup item:
Band (2):
SSID (3):
Site Survey (4):
8.1.3 Setup procedure for 'AP Bridge‐Point to Point':
In this mode, you can connect the X650 with another to combine two access
points and expand the scope of your wireless network, and all clients (wired
only – AP will not accept wireless clients in this mode) of the two wireless
routers will think they are on the same physical network. This function is very
convenient when you need to connect two networks between two buildings.
Here are instructions on how to connect two wireless routers together:
2.4GHz AP Bridge (Point to Point) Settings
Select the band you want to use.
This is the name of the wireless network. You can type the
SSID of the network you would like to connect to here.
When you use the X650 as a wireless station for Ethernet
network devices to have wireless capability, you have to
associate it with a working access point. Click 'Select
Site Survey' button, then a "Wireless Site Survey Table"
will pop up. It will list all available access points nearby.
You can select an access point from the table and it will
join wireless LAN through this access point.
77
1
2
3
4
Advertisement
Table of Contents
