Table of Contents
Advertisement
3. Connect the A/C power adapter to the wall socket, and then connect it to
the 'Power' socket of the X650.
4. Please check all LEDs on the front panel. 'PWR' LED should be steadily
on, WAN and LAN LEDs should be on if the computer / network device
connected to the respective port of the router is powered on and correctly
connected. If PWD LED is not on, or any LED you expected is not on,
please recheck the cabling or jump to
reasons and solutions.
'10.2 Troubleshooting'
15
for possible
Advertisement
Table of Contents
