Table of Contents
Advertisement
1
11
Here are descriptions of each setup item:
Enable MAC
Filtering (1):
Client PC
MAC address (2):
Computer Name (3): Pull down the menu and all the computers connected to
Comment (4):
2
Check this box to enable MAC address based
filtering, and please select 'Deny' or 'Allow' to decide the
behavior of MAC filtering table. If you select deny, all
MAC addresses listed in filtering table will be denied
from connecting to the network; if you select allow, only
MAC addresses listed in filtering table will be able to
connect to the network, rejecting all other network
devices.
Please input the MAC address of computer
or network device here, dash ( - ) or colon ( : ) are not
required (i.e. If the MAC address label of your wireless
device indicates 'aa-bb-cc-dd-ee-ff' or
'aa:bb:cc:dd:ee:ff', just input 'aabbccddeeff'.
the X650 will be listed here. You can easily select the
computer name without checking the IP address of the
computer.
You can input any text here as the comment of this MAC
address, like 'ROOM 2A Computer' or anything. You can
input up to 16 alphanumerical characters here. This is
optional and you can leave it blank, however, it is
3
8
14
13
16
117
4
5
6
7
9
10
12
15
Advertisement
Table of Contents
