Table of Contents
Advertisement
Please click 'Continue' to return to the previous setup menu and continue with
setup procedures, or click 'Apply' to reboot the router so that settings take
effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the 'Cancel' button.
6.4 Setup procedure for 'PPTP':
PPTP requires two types of settings: WAN interface setting (setup IP address)
and PPTP setting (PPTP user name and password). Here we start with the
WAN interface setting:
Select the way you obtain an IP address from your service provider here. You
can choose 'Obtain an IP address automatically' (equal to DHCP, please refer
to 'Cable Modem' section above), or 'Use the following IP address' (i.e. static
IP address)
53
Advertisement
Table of Contents
