Table of Contents
Advertisement
5GHz AP Bridge (Point to Point) Settings
NOTE: Two wireless routers must use the same mode, band, channel
number, and security setting!
Here are descriptions of each setup item:
Band (2):
Channel
Number (3):
MAC
address 1(4):
Security
Settings (5):
Select the band you want to use (two wireless routers
must use the same settings).
Select the channel you want to use (two wireless
routers must use the same settings).
Input the MAC address of another wireless router.
Click to set security for this connection
(Please go to section '8.3 Wireless Security'
for detailed instructions).
78
1
2
3
4
5
1
2
3
4
5
Advertisement
Table of Contents
