Table of Contents
Advertisement
Reset (9):
Virtual Server
Table (10):
Delete (11):
Delete All (12):
Reset (13):
After you finish with all settings, please click 'Apply' (14) button and the
following message will be displayed on your web browser:
Please click 'Continue' to return to the previous setup menu and continue with
other setup procedures, or click 'Apply' to reboot the router so the settings will
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to previously-saved values,
please click the 'Cancel' button.
Remove all inputted values.
All existing virtual server mappings will be
displayed here.
Please select a virtual server mapping by clicking
the 'Select' box of the mapping, then click 'Delete
Selected' button to remove the mapping. If there is no
existing mapping, this button will be grayed out.
Delete all mappings in virtual server table.
Unselect all mappings.
110
Advertisement
Table of Contents
