Table of Contents
Advertisement
Reset (12):
Unselect all mappings.
After you finish with all settings, please click 'Apply' (13) button and the
following message will be displayed on your web browser:
Please click 'Continue' to return to the previous setup menu and continue with
other setup procedures, or click 'Apply' to reboot the router so the settings will
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page to their previously-saved values,
please click the 'Cancel' button.
9.2.3 Virtual Server
This function allows you to redirect a port on Internet IP address (on WAN
port) to a specified port of an IP address on local network, so you can setup an
Internet service on the computer through local network, without exposing it on
Internet directly. You can also build many sets of port redirection, to provide
multiple types of Internet services on different local computers via a single
Internet IP address.
Please click 'NAT' menu on the left of the web management interface, then
click 'Virtual Server', and the following message will be displayed on your
web browser:
108
Advertisement
Table of Contents
