Table of Contents
Advertisement
Please click 'Continue' to return to the previous setup menu and continue with
other setup procedures, or click 'Apply' to reboot the router so the settings will
take effect (Please wait about 40 seconds for router to reboot).
If you want to reset all settings on this page back to their previously-saved
values, please click the 'Cancel' button.
9.2.5 UPnP Setting
This function enables network auto-configuration for peer-to-peer
communications; with this function, network devices will be able to
communicate with other devices directly and learn information about other
devices. Many network devices and applications rely on UPnP function
nowadays.
Please click 'NAT' menu on the left of the web management interface, then
click 'UPnP', and the following message will be displayed on your web
browser:
There is only one option on this page; please select 'Enable' or 'Disable' to
enable or disable UPnP function, then click 'Apply' button, and the following
message will be displayed on your web browser:
113
Advertisement
Table of Contents
