Table of Contents
Advertisement
NOTE: For 802.11n/11ac mode: The router is operating in a 2T2R
Spatial Multiplexing MIMO configuration.
SSID (3):
Channel Number (4): Please select a channel from the dropdown list of
5GHz (A+N+AC): this mode allows 802.11a, 802.11n
and 802.11ac wireless network clients to connect to X650
(maximum transfer rate 54Mbps for 802.11a clients,
maximum 300Mbps for 802.11n clients, and maximum
867Mbps for 802.11ac clients).
This is the name of the wireless router. You can type any
alphanumerical characters here (maximum 32
characters). SSID is used to identify your own wireless
router from others when there are other wireless routers
in the same area. Default SSID is 'default', it's
recommended to change default SSID value to one that is
meaningful to you, like myhome, office_room1, etc.
'Channel Number'. You can choose any channel number
you want and almost all wireless clients can locate the
channel you are using automatically without any problem.
However, it is still useful to remember the channel
number you use as some wireless clients support manual
channel number select, and this would help in certain
scenarios when there is a radio communication problem.
The available channel numbers for the following bands
are:
2.4GHz Band
The available channel numbers are 1 to 13 for European
countries, 1 to 11 for USA.
75
Advertisement
Table of Contents
