Table of Contents
Advertisement
8.5 Wi‐Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) is the simplest way to build a connection
between wireless network clients and the X650. You do not have to select
encryption mode and input a long encryption passphrase every time you need
to setup a wireless client; you only have to press a button on the wireless client
and the X650, and the WPS will do the rest for you.
The X650 supports two types of WPS: Push-Button Configuration (PBC), and
PIN code. If you want to use PBC, you have to push a specific button on the
wireless client to start WPS mode and switch the X650 to WPS mode as well.
You can push the Reset/WPS button of the X650 or click the 'Start PBC'
button in the web configuration interface to do this; if you want to use a PIN
code, you have to know the PIN code of the wireless client and switch it to
WPS mode, then provide the PIN code of the wireless client you wish to
connect to this wireless router. The detailed instructions are listed follow:
Please click the '2.4GHz Wireless' or '5GHz Wireless' menu on the left of the
web management interface, then click 'WPS', and the following message will
be displayed on your web browser:
1
3
4
5
97
2
Advertisement
Table of Contents
