Table of Contents
Advertisement
Please select 'Enable' or 'Disable' to enable or disable firewall function of this
router, then click 'Apply' button, and the following message will be displayed
on your web browser:
Please click 'Continue' to return to the previous setup menu and continue with
other setup procedures, or click 'Apply' to reboot the router so the settings will
take effect (Please wait about 40 seconds for router to reboot).
9.3.1 Access Control
This function allows or denies computers with a specific MAC address from
connecting to the network; it can also allow or deny computers with a specific
IP address, protocol, or port.
Please click 'Firewall' menu on the left of the web management interface, then
click 'Access Control', and the following message will be displayed on your
web browser:
116
Advertisement
Table of Contents
