Table of Contents
Advertisement
9.2.4 Port Mapping for Special Applications
Some applications require more than one connection at a time; these
applications will not work with simple NAT rules. In order to make these
applications work, you can use this function to let these applications work.
1
2
Here are descriptions of each setup item:
Enable (1):
IP Address (2):
Computer Name (3): Pull down the menu and all the computers connected to
TCP Port to Open (4): This is the outgoing (Outbound) range of TCP port
UDP Port to Open (5): This is the outgoing (Outbound) range of UDP port
Comment (6):
3
Check this box to enable special applications and
uncheck this box to disable virtual server.
Input the IP address of the computer you want to open
the ports.
the router will be listed here. You can easily to select the
computer name without checking its IP address.
numbers for this particular application.
numbers for this particular application.
The description of this setting.
111
4
5
7
8
11
12
14
6
9
10
13
Advertisement
Table of Contents
