3.2 Connecting to X650 by web browser
After the network connection is built, the next step is to setup the X650
with proper network parameters, so it can work properly in your network
environment.
Before you can connect to the X650 and start configuration procedures,
your computer must be able to get an IP address automatically (use dynamic IP
address). If it is set to use static IP address, or if you are unsure, please follow
these instructions to configure your computer to use dynamic IP address:
If the operating system of your computer is...
Windows 95/98/Me
Windows 2000
Windows XP
Windows Vista/Windows 7
Windows 8
3.2.1 Windows 95/98/Me IP address setup:
1. Click 'Start' button (it should be located at lower-left corner of your
computer), then click control panel. Double-click Network icon, and
Network window will appear. Select 'TCP/IP', then click 'Properties'.
- please go to section 3.2.1
- please go to section 3.2.2
- please go to section 3.2.3
- please go to section 3.2.4
- please go to section 3.2.5
16