Troubleshooting; Chapter 26 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications NBG-419N v2 User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• Router Access and Login
• Internet Access
• Resetting the Router to Its Factory Defaults
• Wireless Router/AP Troubleshooting
• ZyXEL Share Center Utility Problems
26.1 Power, Hardware Connections, and LEDs
The Router does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the Router.
1
Make sure the power adaptor or cord is connected to the Router and plugged in to an appropriate
2
power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the Router.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections. See the Quick Start Guide.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Disconnect and re-connect the power adaptor to the Router.
4
If the problem continues, contact the vendor.
5
NBG-419N v2 User's Guide
C
HAPTER

Troubleshooting

Section 1.5 on page
2 6
17.
189