ZyXEL Communications NBG-419N v2 User Manual page 163

Note: The two tables shown in this screen can be configured and applied at the same
time.
Click Management > Bandwidth Management > Advanced to open the bandwidth
management Advanced screen.
Figure 113 Management > Bandwidth Management > Advanced
The following table describes the labels in this screen.
Table 73 Management > Bandwidth Management > Advanced
LABEL
Management Bandwidth
Upstream
Bandwidth
Downstream
Bandwidth
Application List
NBG-419N v2 User's Guide
DESCRIPTION
Select the total amount of bandwidth (from 64 Kilobits to 32 Megabits) that you want to
dedicate to uplink traffic.
This is traffic from LAN/WLAN to WAN.
Select the total amount of bandwidth (from 64 Kilobits to 32 Megabits) that you want to
dedicate to uplink traffic.
This is traffic from WAN to LAN/WLAN.
Use this table to allocate specific amounts of bandwidth based on a pre-defined service.
Chapter 22 Bandwidth Management
163