The Auto-Connect Printer List Window - ZyXEL Communications NBG-419N v2 User Manual

Chapter 2 ZyXEL NetUSB Share Center Utility
The following table describes the labels in this window.
Table 5 ZyXEL NetUSB Share Center Utility Configuration Window
LABEL
Basic
Language
OK
Cancel
Apply

2.2.3 The Auto-Connect Printer List Window

This section describes the utility's auto-connect printer list window. You can open it by clicking the
Tools > Auto-Connect Printer List menu command.
Note: If the computer is connecting to the shared USB printer for the first time, you need
to click Connect and setup the printer before you can use the Auto-Connect
Printer function. See
Figure 6 ZyXEL NetUSB Share Center Utility Auto-Connect Printer List Window
The following table describes the labels in this screen.
Table 6 ZyXEL NetUSB Share Center Utility Auto-Connect Printer List Window
LABEL
Server IP &
Printer Name
Windows
Printer Name
Delete
Close
24
DESCRIPTION
Select this to run the utility automatically when you log into or start up Windows.
Select a language for the ZyXEL NetUSB Share Center Utility. You must restart the utility for
the change to take effect.
Click this to save your changes and close the window.
Click this cancel to close the window without saving.
Click this to save your changes without closing the window.
Chapter 11 on page 87
DESCRIPTION
Displays a list of print server IPs and printer names connected to this Router.
Displays a corresponding list of Windows printer names connected to this devices listed in
the other list.
Select an printer from the list and click this to remove it.
Click this to close the window.
for more details.
NBG-419N v2 User's Guide