The Wps Button; Wall Mounting - ZyXEL Communications NBG-419N v2 User Manual

Chapter 1 Getting to Know Your Router
Table 1 Front Panel LEDs and WPS Button (continued)
LED
USB

1.6 The WPS Button

Your Router supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless
network. WPS is an industry standard specification, defined by the WiFi Alliance.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Each WPS connection works between two devices. Both
devices must support WPS (check each device's documentation to make sure).
Depending on the devices you have, you can either press a button (on the device itself, or in its
configuration utility) or enter a PIN (a unique Personal Identification Number that allows one device
to authenticate the other) in each of the two devices. When WPS is activated on a device, it has two
minutes to find another device that also has WPS activated. Then, the two devices connect and set
up a secure network by themselves.
For more information on using WPS, see

1.7 Wall Mounting

You may need screw anchors if mounting on a concrete or brick wall.
Table 2 Wall Mounting Information
Distance between holes
M4 Screws
Screw anchors (optional)
Select a position free of obstructions on a wall strong enough to hold the weight of the
1
device.
Mark two holes on the wall at the appropriate distance apart for the screws.
2
Be careful to avoid damaging pipes or cables located inside the wall
when drilling holes for the screws.
18
COLOR STATUS DESCRIPTION
Green On The Router has a USB device installed.
Blinking The Router is transmitting and/or receiving data from routers
through an installed USB device.
Off There is no USB device connected to the Router.
Section 11.3 on page 87.
11 cm
Two
Two
NBG-419N v2 User's Guide