Remote Management; Chapter 23 Remote Management; Overview; What You Can Do - ZyXEL Communications NBG-419N v2 User Manual

23.1 Overview

This chapter provides information on the Remote Management screens.
Remote Management allows you to manage your Router from a remote location through the
following interfaces:
• LAN and WAN
• LAN only
• WAN only
Note: The Router is managed using the Web Configurator.

23.2 What You Can Do

Use the WWW screen
can be managed remotely and specify a secure client that can manage the Router.

23.3 What You Need to Know

Remote management over LAN or WAN will not work when:
The IP address in the Secured Client IP Address field
1
match the client IP address. If it does not match, the Router will disconnect the session
immediately.
There is already another remote management session. You may only have one remote
2
management session running at one time.
There is a firewall rule that blocks it.
3

23.3.1 Remote Management and NAT

When NAT is enabled:
• Use the Router's WAN IP address when configuring from the WAN.
• Use the Router's LAN IP address when configuring from the LAN.
NBG-419N v2 User's Guide
C

Remote Management

(Section 23.4 on page 169) to define the interface/s from which the Router
HAPTER
(Section 23.4 on page
2 3
169) does not
168