Pptp Encapsulation - ZyXEL Communications NBG-419N v2 User Manual

Table 54 Network > WAN > Internet Connection: PPPoE Encapsulation (continued)
LABEL
Use Fixed IP
Address
My WAN IP
Address
WAN DNS Assignment
First DNS Server
Second DNS
Server
WAN MAC
Address
Factory default
Clone the
computer's MAC
address - IP
Address
Set WAN MAC
Address
Apply
Reset

13.4.3 PPTP Encapsulation

Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables secure transfer of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/IP-
based networks.
PPTP supports on-demand, multi-protocol and virtual private networking over public networks, such
as the Internet.
NBG-419N v2 User's Guide
DESCRIPTION
Select this option If the ISP assigned a fixed IP address.
Enter your WAN IP address in this field if you selected Use Fixed IP Address.
Select From ISP if your ISP dynamically assigns DNS server information (and the
Router's WAN IP address). The field to the right displays the (read-only) DNS server IP
address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's
IP address in the field to the right. If you chose User-Defined, but leave the IP address
set to 0.0.0.0, User-Defined changes to None after you click Apply. If you set a second
choice to User-Defined, and enter the same IP address, the second User-Defined
changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure a DNS
server, you must know the IP address of a computer in order to access it.
The MAC address section allows users to configure the WAN port's MAC address by using
the Router's MAC address, copying the MAC address from a computer on your LAN or
manually entering a MAC address.
Select Factory default to use the factory assigned default MAC Address.
Select Clone the computer's MAC address - IP Address and enter the IP address of
the computer on the LAN whose MAC you are cloning.
Select this option and enter the MAC address you want to use.
Click Apply to save your changes back to the Router.
Click Reset to begin configuring this screen afresh.
Chapter 13 WAN
123