8.1 Overview
The Router is set to router mode by default. Routers are used to connect the local network to
another network (for example, the Internet). In the figure below, the Router connects the local
network (LAN1 ~ LAN4) to the Internet.
Figure 44 Router Network
Note: The Status screen is shown after changing to the Expert mode of the Web
Configurator. It varies depending on the device mode of your Router.
8.2 What You Can Do
Use the Status screen
NBG-419N v2 User's Guide
Router
(Section 8.3 on page
C
H A PT ER
Router Mode
Modem
63) to view read-only information about your Router.
8
62