ZyXEL Communications NBG-419N v2 User Manual page 79

Table 34 Status Screen: WISP Mode (continued)
LABEL
- MAC Address
- IP Address
- IP Subnet Mask
- Default Gateway
- DHCP
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
- WLAN OP Mode
- MAC Address
- Status
- Name (SSID)
- Connect Status
- Security Mode
- 802.11 Mode
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
- Configuration Mode
Interface Status
Interface
Status
NBG-419N v2 User's Guide
DESCRIPTION
This shows the WAN Ethernet adapter MAC Address of your device.
This shows the WAN port's IP address.
This shows the WAN port's subnet mask.
This shows the WAN port's gateway IP address.
This shows the LAN port's DHCP role - Client or Server.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server or None.
This is the device mode (Section 6.1.2 on page
- Access Point Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON or OFF.
This shows a descriptive name used to identify the Router in the wireless LAN.
This shows whether or not the Router has successfully associated with an access point -
Connected or Disassociated.
This shows the level of wireless security the Router is using.
This shows the wireless standard.
This column shows the type of data the Router is recording.
This column shows the actual data recorded by the Router.
This is the total time the Router has been on.
This field displays your Router's present date and time.
This displays what percentage of the Router's processing ability is currently used. When this
percentage is close to 100%, the Router is running at full load, and the throughput is not
going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the Router is using.
This shows whether the firewall is enabled or not.
This shows whether the bandwidth management is enabled or not.
This shows whether UPnP is enabled or not.
This shows the web configurator mode you are viewing - Expert.
This displays the Router port types. The port types are: LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
Chapter 10 WISP Mode
49) to which the Router's wireless LAN is set
79