Wireless Lan Advanced Screen - ZyXEL Communications NBG-419N v2 User Manual

pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC
address of the devices to configure this screen.
To change your Router's MAC filter settings, click Network > Wireless LAN > MAC Filter. The
screen appears as shown.
Figure 77 Network > Wireless LAN > MAC Filter
The following table describes the labels in this menu.
Table 46 Network > Wireless LAN > MAC Filter
LABEL
Access Policy
Policy
Add a station
Mac Address
MAC Filter Summary
Delete
MAC Address
Apply
Cancel

12.6 Wireless LAN Advanced Screen

Use this screen to allow wireless advanced features, such as intra-BSS networking and set the
RTS/CTS Threshold
NBG-419N v2 User's Guide
DESCRIPTION
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Allow to permit access to the Router, MAC addresses not listed will be denied
access to the Router.
Select Reject to block access to the Router, MAC addresses not listed will be allowed to
access the Router
Enter the MAC addresses of the wireless station that are allowed or denied access to the
Router in these address fields. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Click Add.
Click the delete icon to remove the MAC address from the list.
This is the MAC address of the wireless station that are allowed or denied access to the
Router.
Click Apply to save your changes back to the Router.
Click Cancel to reload the previous configuration for this screen.
Chapter 12 Wireless LAN
109