Remote Management And The Firewall; Access Methods; Using Zywall Smt Menus; Chapter 14 Introducing The Zywall Firewall - ZyXEL Communications ZYWALL 10W User Manual

14.1 Remote Management and the Firewall

When you configure remote management to allow management from the WAN, you still need to configure a
firewall rule to allow access. See the Remote Management chapter for details on remote management.

14.2 Access Methods

The web configurator is, by far, the most comprehensive firewall configuration tool your ZyWALL has to
offer. For this reason, it is recommended that you configure your firewall using the web configurator; see the
following chapters for instructions. SMT screens allow you to activate the firewall. CLI commands provide
limited configuration options and are only recommended for advanced users, please refer to the appendix of
firewall CLI commands.

14.3 Using ZyWALL SMT Menus

From the main menu enter 21 to go to Menu 21 - Filter Set and Firewall Configuration to display the
screen shown next.
Introducing the ZyWALL Firewall
Introducing the ZyWALL Firewall
This chapter shows you how to get started with the ZyWALL firewall.
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup

Figure 14-1 Menu 21: Filter and Firewall Setup

ZyWALL 10~100 Series Internet Security Gateway
Chapter 14
14-1