L2Tp Setup - Client - ZyXEL Communications SBG5500 Series User Manual

Table 76 Configuration > VPN > L2TP VPN > Server
LABEL
Apply
Reset

10.7.2 L2TP Setup - Client

This screen displays when you select Client in the Type field.
Figure 138 Configuration > VPN > L2TP VPN > Client
The following table describes the labels in this screen.
Table 77 Configuration > VPN > L2TP VPN > Client
LABEL
Type
Enable
Default Route Enable
Nailed-up Enable
Nailed-up Period
Server IP Address or Name
Chapter 10 VPN
DESCRIPTION
Click Apply to save your changes back to the SBG.
Click Reset to restore your previous settings.
DESCRIPTION
Select Client to have the SBG act as a L2TP VPN client. Also, the screen varies
depending on which option you select here.
Select the check box to enable the SBG's L2TP VPN function as a client.
Select the check box to use the L2TP VPN connection as the system default route.
Select this if you want the SBG to automatically reconnect when the L2TP VPN
connection is down. The attempt to reconnect will continue until the L2TP VPN
connection is up again.
Enter a value in seconds for the SBG to wait before re-initiating L2TP VPN
connections. The valid range for the period is 10-180 seconds.
Enter the IP address or domain name of the LNS (L2TP Network Server).
SBG5500/3310 Series User's Guide
181