Error Message - Roland RS-5 Service Notes

RS-5
• When an abnormal condition occurs in the FLASH MEMORY
(USER MEMORY), the following screen is displayed.
Check the following parts.
MAIN BOARD IC34

ERROR MESSAGE

This section explains the meaning of the various error messages that
the RS-5 may display, and describes the measures to take when
these appear.
Error Message List
BULK DUMP
Checksum Error
Cause: There is a mistake in the checksum value for the
received System Exclusive message.
Solution:
Correct the checksum value.
MIDI Buffer Full
Cause: The data cannot be processed correctly due to an
excessive number of MIDI messages.
Solution: Reduce the number of MIDI messages being
received.
MIDI Communication Error
Cause: There is a problem with the MIDI cable connection.
Solution: Check to make sure no cable has been disconnected,
and that there are no shorts.
Receive Data Error
Cause:
MIDI messages could not be received correctly.
Solution: If this same message continues to reappear, it means
that there is a mistake in the content of the MIDI
message.
User Memory Backup Error
Cause: There is an error in the memory used for storage of
User Area and System Setup data.
Solution: Consult your dealer or local Roland service for
repair.
User Memory Damaged
Cause: User Memory data has been corrupted.
Solution: Carry out the Factory Reset operation to restore the
factory settings.
Jan. 2001
15