To Use The File Explorer - Agilent Technologies 6000 Series User Manual

To use the file explorer

N O T E
6000 Series Oscilloscope User's Guide
The File Explorer menu lets you load or delete files from a USB
mass storage device.
1 Connect a USB mass storage device to the USB port on the
front or the rear of the oscilloscope. A small colored circle
icon will be displayed as the USB device is read.
2 Press Utility&File Explorer.
3 Press the far left softkey and turn the Entry knob to select
the USB mass storage device, and a directory and file on the
USB mass storage device.
You can create directories on a USB mass storage device
using your PC or other instrument. You can navigate to any
directory that you have made using the Entry knob and the
far left softkey.
Navigate Load selected
using Entry file
knob, select
using this key
If two USB mass storage devices are connected to the oscilloscope, the
first one is designated "drive0" and the second one is designated "drive5,"
not "drive1." This numbering method is normal; it is inherent in the USB
driver.
Delete selected
file
Saving and Printing Data
Return to
previous menu
7
261